CLS2 USA PC Version - Complete With Mains Lead, Wall Mounted Induction Loop Driver

Model: CLS002USPC

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Designed for simple discreet installation, the CLS2 is the most capable driver in its class. The amplifier is very compact, yet the most powerful unit available designed specifically for wall mounting. All connections and controls are secured behind a tamper resistant, hinged, detachable cover. Combined with its small size, the range of mounting and cabling options ensure that installation is convenient and tidy in any environment. Input options are extensive, with four independent inputs for balanced microphone, balanced and unbalanced line, low impedance and 100V – line speaker systems, plus priority alarm, doorbell or telephone connections.

Wireless Receiver Transmission - Loop
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 14 F
Maximum Frequency Response (Bandwidth): 6.40 kHz
Maximum Frequency Response (Bandwidth): 6400 Hz
Minimum Frequency Response (Bandwidth): 80 Hz
Minimum Frequency Response (Bandwidth): 0.08 kHz
Depth: 1.73 in
Height: 7.87 in
Width: 7.87 in
Product Weight: 3.97 lbs
Sustainability Rating: IP20
Input 1: Input 1 Balanced Mic, balanced or unbalanced line, Input impedance 10kOHMS per side, Min level (MIC/Line -73dBu/-31dBu, Max level (MIC/Line) -37dBu/+5dBu, Phantom voltage MIC only +12V
Input 2: As Input 1 mic level, Balanced mic, Input impedance 10kOHMS per side, Min level -73dBu, Max level -37dBu, Phantom voltage +12V
Input 3: Balanced or unbalanced line, expansion port, Input impedance 1MOHMS per channel, Min level -33dBu, Max level +3dBu
Input 4: Isolated 100V line or low impedance mono or stereo speaker, Input impedance 100V Line/spkr 120kOHMS/7.8kOHMS, Min level 100V Line/spkr +14dBu/-9dBu, Max level 100V Line/spkr [gt]+47dBu/[gt]+27dBu
Alert 1: When energised, turns down the other inputs and produces a 520Hz square wave tone on the loop. Min/max input voltage 5V- 24V ac/dc
Alert 2: A pair of contacts which when shorted turns down the other inputs and produce a pulsed 520Hz square wave tone on the loop
AC power input supply: 230V 30Ws 45-65Hz 120V option available (ETL Approved, Connected via chassis mounted screw terminal block
Input fuse: 230V version - T250mA/120V version - T500mA
Drive voltage: [gt]7.1Vrms - 10.0Vpk
Drive current: Continuous 1kHz sine wave [gt]4.9Arms 7.0A pk, Short term peaks [gt]7A RMS 10Apk
Minimum Loop Resistance: 0.2OHMS
Maximum Loop Impedance: 1.3OHMS
Distortion: THD+N [lt]0.5%1kHz sine at 2.33Arms
Automatic Gain Control: The AGC is optimised for speech. Dynamic range [gt]36dB
Metal Loss Correction: (MLC) 0 to 3dB per octave frequency correction (1kHz remains constant). Control mounted on PCB
Cooling: Natural convection
Mounting: Wall mounting, secured by 4 screws

UP36401-9_Datasheet_CLS2_print.pdf 1216543 kb - Data Sheet

Project List

UP16401-11-CLS2-hb.pdf 956796 kb - Instructions

Project List