CLS1 USA PC Version - Complete With Mains Lead, Wall Mounted Induction Loop Driver

Model: CLS001USPC

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Designed for simple discrete installation, the CLS1 offers the most cost effective and capable solution in its class. The amplifier is very compact and designed specifically for wall mounting. All connections and controls are secured behind a tamper resistant, hinged, detachable cover. Combined with its small size, the range of mounting and cabling options ensure that installation is convenient and tidy in any environment. Input options are comprehensive, with three independent inputs for balanced microphone, balanced and unbalanced line, low impedance and 100V – line speaker systems.

Wireless Receiver Transmission - Loop
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 14 F
Maximum Frequency Response (Bandwidth): 6.30 kHz
Maximum Frequency Response (Bandwidth): 6300 Hz
Minimum Frequency Response (Bandwidth): 80 Hz
Minimum Frequency Response (Bandwidth): 0.08 kHz
Depth: 1.73 in
Height: 7.87 in
Width: 7.87 in
Product Weight: 3.97 lbs
Sustainability Rating: IP20
Input 1: Balanced Mic, balanced or unbalanced line, Input impedance 10kOHMS per side, Min level (MIC/Line -73dBu/-31dBu, Max level (MIC/Line) -37dBu/+5dBu, Phantom voltage MIC only +12V
Input 2: Balanced or unbalanced line, expansion port, Input impedance 1MOHMS per channel, Min level -33dBu, Max level +3dBu
Input 4: Isolated 100V line or low impedance mono or stereo speaker, Input impedance 100V Line/spkr 120kOHMS/7.8kOHMS, Min level 100V Line/spkr +14dBu/-9dBu, Max level 100V Line/spkr [gt]+47dBu/[gt]+27dBu
AC power input supply: 230V 30Ws 45-65Hz 120V option available (ETL Approved, Connected via chassis mounted screw terminal block
Input fuse: 230V version - T250mA/120V version - T500mA
Drive voltage: [gt]7.8Vrms - 11Vpk
Drive current: Continuous 1kHz sine wave [gt]3.5Arms 5Apk, Short term peaks [gt]5Arms 7Apk
Minimum Loop Resistance: 0.2OHMS
Maximum Loop Impedance: 1.8OHMS
Distortion: THD+N [lt]0.5%1kHz sine at 2.33Arms
Automatic Gain Control: The AGC is optimised for speech. Dynamic range [gt]36dB
Metal Loss Correction: (MLC) 0 to 3dB per octave frequency correction (1kHz remains constant). Control mounted on PCB
Cooling: Natural convection
Mounting: Wall mounting, secured by 4 screws

UP37202-9_datasheet_cls1_hi-res.pdf 1657131 kb - Data Sheet

Project List

UP17201-11-CLS1-HB.pdf 521018 kb - Instructions

Project List