C7-2 DSP Multiloop Driver, Dante

Model: C7-2D US

Performance, consistency and certainty of results
Intuitive digital interface
Fast, accurate setup and adjustment
Simple digital interface for accurate adjustment
Network and stand-alone options

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The C7-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology. C Series units feature digital signal processing and networking functionality, and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.

Performance, consistency and certainty of results
Intuitive digital interface
Fast, accurate setup and adjustment
Simple digital interface for accurate adjustment
Network and stand-alone options
Built-in test tones
Compatible with Loopworks Measure LoopLink for
direct and automated driver control
Clear indicators and system diagnostics
Compact 1U rack mount unit with internal power supply
Optimised for speech frequencies with unmatched intelligibilitand capable of high qualitmusical reproduction
Industrstandard Phoenix connectors
Data compliant with IEC 62489-1 Standard
100V line input

Amplifier Type - Other
Dante Enabled - Yes
Rackmountable - Yes
Warranty - Yes

Mounting Width: 19 in
Maximum Frequency Response (Bandwidth): 6.50 kHz
Maximum Frequency Response (Bandwidth): 6500 Hz
Minimum Frequency Response (Bandwidth): 80 Hz
Minimum Frequency Response (Bandwidth): 0.08 kHz
Number of Channels: 2
Total Harmonic Distortion + Noise (THD+N): 0.30 %
Depth: 7.48 in
Height: 1.73 in
Width: 16.93 in
Sustainability Rating: IP20
Warranty (Length/Type): 5 Years
Operating Temperature (Maximum): 95 F
Operating Temperature (Minimum): 32 F
Rack Units (Height): 1
Input 1 and 2: 3 way 3.5mm euroblock screw terminal input (supplied) with a balanced microphone and line level operation, selectable via rear panel switch. Switchable 250Hz low cut filter. Priority input option (network models only)
Microphone/Line: Microphone specification; 200 to 600ohms, sensitivity -67dBu, Selectable 24V phantom power on microphone onl, Line sensitivity -42dBu, Max line level 17Bu. Max mic level -8dBu
100V Line(Input 2 only): 2 way 5mm euroblock screw terminal (supplied), Sensitivity +7dBu
Dante(Optional C5/C7): RJ45 Ethernet, control and monitoring, Hosted web server, Telnet and SNMP
Loop Connectors: 4 way 5mm euroblock screw terminal (supplied) for each output, for twisted pair or star-quad configured feed cables
DC Output: 2 way 3.5mm euroblock screw terminal (supplied), Re-settable, fuse protected 12V 0.1A
Status Relay (C10 and C14): 2 way 3.5mm euroblock screw terminal (supplied), Normally closed isolated relay contacts, open in fault conditions. Rated load 0.5A at 125VAC, 2A at 30VDC
Line Output: 3 way 3.5mm euroblock screw terminal (supplied) post AGC balanced output
USB: Firmware updates or power for wireless router (200mA max)
Automatic Gain Control: The AGC is optimised for speech. Dynamic range >36dB
Metal Loss Correction: Corrects system frequency response issues due to metal structures in a building. Gain constant at 1kHz, adjustable gain slope from 0 to 4dB per octave in 0.25dB increments, Custom dual slope MLC allows different slopes and knee frequency to be set via the menu (network models only). This does not compensate for signal loss from metal structures which can be significant
Phase Shift: User selectable (network models only) at 0° or 90° between outputs
STATUS: Tri-colour LED: Solid Green = normal operation; Flashing Green = sleep mode; Flashing Amber = standby; Flashing Red = error; Fast Flashing Amber = firmware update
Mounting Options: Freestanding, Options 1U 19 inch rack mount (brackets fitted as standard) Wall mounted, brackets available separately
Environment: 20 to 90% relative humidity
Cooling: C5/C7 Passive

C-Series-sales-sheet.pdf 724208 kb - Brochure

Project List

C-Series-Handbook_wav.pdf 3384532 kb - Instructions

Project List