Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4x1 Computer Graphics Video & Stereo Audio Standby Switcher
Series: Main
Model: VP-411DS
Part #: 51-70654190
- High Bandwidth - 300MHz (-3dB)
- Looping Input - Input 1
- Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
- Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
- Primary Input - Selectable
Product Info
Tech Specs
Documents
The VP-411DS is a high-performance switcher for computer graphics video signals, with-resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, the switching priority can be set for each of the four inputs.
- High Bandwidth - 300MHz (-3dB)
- Looping Input - Input 1
- Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
- Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
- Primary Input - Selectable
- Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), contact closure, & IR remote (included)
- Output Disconnect
- Front Panel Lockout
- Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with an optional RK-1 rack adapter
- Rackmountable - Yes
- Supported Resolution - UXGA (1600x1200)
- Switcher Audio Input Signal Type - Stereo Audio
- Switcher Connector Type - Other
- Switcher Type - Audio
- Switcher Type - Computer
- Switcher Type - Video
- Switcher Video Signal Supported - Component
- Warranty - Yes
- Spec Sheet available - Yes
- Product Weight: 2.43 lbs
- Number of Inputs: 4
- Number of Outputs: 1
- Current Draw: 0.23 Amps
- DC Voltage: 12 Volts
- Depth: 6.40 in
- Height: 1.70 in
- Width: 8.46 in
- Inputs: 4 UXGA with loop on IN 1 on 15-pin HD connectors, 4 unbalanced stereo audio with loop on IN 1 on 3.5mm mini jacks
- Outputs: 1 UXGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
- Max. Output Level:
VIDEO: 1.8Vpp
AUDIO: 7.2Vpp - Bandwidth (-3dB):
VIDEO: 300MHz
AUDIO: >40kHz - Diff. Gain: 0.03 %
- Diff. Phase: 0.06 deg
- K-Factor: <0.05 %
- S/N Ratio:
VIDEO:73dB @5MHz
AUDIO: 93dB - Crosstalk (All Hostile):
VIDEO:–50dB
AUDIO: –72dB @1kHz - Controls: Input selector; PANEL LOCK and OFF pushbuttons; IR remote control reception window; connector for extended IR reception; RS-232 connector; contact closure terminal block for external wire switching; input priority selector DIP-switches; normal/Kr-isp® and program/normal mode selectors via slide switches on the underside
- Coupling:
VIDEO: DC
AUDIO: DC - Audio THD + Noise: 0.004% @1kHZ
- Audio 2nd Harmonic: 0.002% @1kHZ
- Accessories: Power supply, IR remote control
- Options: RK-1 19" rack adapter, external remote IR receiver cable
- Input Signal Types: Computer Graphics Video
- Output Signal Types: Computer Graphics Video
- Rack Units (Height): 1
- Regulatory Compliance: WEEE
Datasheet for 4x4 XGA & (B) Audio Matrix Switcher with Delayed Switching
1634088 kb
- Other
Standby Switcher
200 kb
- Data Sheet
Switcher
904 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact OPTECH
close
OPTECH
144 Stafford Court
Williamsburg, VA 23185
USA
(800) 868-3282
https://www.optech.net/
Contact in regards to this product:
Kramer Electronics USA, Inc.
Model: VP-411DS
Request more information from a dealer near you
close
Request more information from a dealer near you